SEWERGARD® HIGH BUILD 210XHB

Physical properties were determined on specimens prepared under laboratory conditions using applicable ASTM procedures. Actual field conditions may vary and yield different results; therefore, data is subject to reasonable deviation.

Sauereisen SewerGard® 210XHB is a protective lining specifically formulated for municipal wastewater environments. SewerGard® 210XHB provides a chemical-resistant barrier for concrete, masonry, brick, and steel substrates. As a 100% solids epoxy polymer, 210XHB is specified to protect infrastructure throughout the wastewater industry. SewerGard 210XHB is a fast-setting, high-strength lining that enables high-build capabilities.

Applications range from manholes and lift stations within the collection systems to tankage, structural steel, digesters, clarifiers, and secondary containment at treatment plants. Installation of SewerGard® 210XHB is completed using plural-component spray equipment.

CHARACTERISTICS

• Can be applied to surface-saturated dry concrete (SSD).
• Color: SewerGard® Beige for greater light reflection.
• Cured lining will prevent inflow & infiltration.
• High-strength 16,000 psi.
• Resistant to hydrogen sulfide, sulfuric acid, MIC and treatment chemicals.
• Smooth finish – aids wash down and prevents debris accumulation.
• Installed thickness up to 300 mils in a single coat.
• User friendly by plural component spray equipment.
• Zero VOCs, 100% solids.