SEWERGARD HIGH-STRENGTH 210X

Physical properties were determined on specimens prepared under laboratory conditions using applicable ASTM procedures. Actual field conditions may vary and yield different results; therefore, data is subject to reasonable deviation.

Sauereisen SewerGard® 210X is a protective lining specifically formulated for municipal wastewater environments. SewerGard® 210X provides a chemical-resistant barrier for concrete, masonry, brick, and steel substrates.

As a 100% solids epoxy polymer 210X is specified to protect infrastructure throughout the wastewater industry. Wherever extreme corrosive conditions exist, 210X is used as a stand-alone lining. 210X is a high strength lining that enables high build capabilities. Applications range from manholes and lift stations within the collection systems to tankage, structural steel, digesters, clarifiers, and secondary containment at treatment plants.

Installation of SewerGard® 210X is easily completed using airless or plural component spray equipment.

210X can be hand applied using a trowel, brush or roller.

*Note: Multiple coats or lifts may be required to achieve desired thickness.

CHARACTERISTICS

  • Can be applied to surface dry, saturated concrete (SSD).
  • Color: SewerGard Beige for greater light reflection.
  • Cured lining will prevent inflow and infiltration
  • Elongation (ASTM D638) is 12.9%
  • High Strength 15,500 psi.
  • Resistant to hydrogen sulfide, sulfuric acid, MIC and treatment chemicals.
  • Smooth finish – aids wash down and prevents debris accumulation.
  • Typical installed thickness is 125 mils
  • User-friendly by airless spray, plural component spray equipment, or hand applied by trowel, brush or roller.
  • Zero VOCs, 100% solids