EPOXY JOINT SEALANT 220 & 221

Physical properties were determined on specimens prepared under laboratory conditions using applicable ASTM procedures. Actual field conditions may vary and yield different results; therefore, data is subject to reasonable deviation.

Sauereisen Epoxy Joint Sealants are used to provide a durable joint filler. The materials are 100% solids, pourable epoxies designed to effectively absorb the shock and impact of heavy loads and steel-wheeled vehicles over narrow joints. Available in two formulations, 220 is for general purpose applications and 221 is a NovolaK epoxy for more severe chemical environments.

Sauereisen Joint Sealants are non-shrinking due to their high-solids content and will not become brittle. These self priming materials will flow and self-level to the full depth of the joint. The joint compounds cure quick enough to be ready for foot traffic in 24 hours and chemical service in 3 days.

To use in vertical joints, add 1/2 to 1 pound of Thixotrope 220T (sold separately) to each unit of joint material and mix thoroughly. This results in a viscosity suitable for a caulking gun.

CHARACTERISTICS

• Absorbs heavy loads.
• Resists chipping and wear at joint edges.
• Nonshrinking.
• Pourable and self-leveling.
• Requires no primer.
• Cures on damp surfaces.

HOT-APPLIED MEMBRANE SYSTEM: PRIMER AND ASPHALTIC MEMBRANE 47 & 85

Physical properties were determined on specimens prepared under laboratory conditions using applicable ASTM procedures. Actual field conditions may vary and yield different results; therefore, data are subject to reasonable deviation.

The Sauereisen Hot-Applied Membrane System includes Primer 47 and Asphaltic Membrane 85. These products are installed as a system to form a flexible acid- alkali-, and waterresistant barrier between acid brick or monolithic sheathing and concrete substrates.

Benefits of the Asphaltic Membrane are two-fold. It not only protects concrete against chemical attack, but isolates masonry linings and monolithics from structural movement of the underlying substrate. The 47/85 system offers proven, long-term service in concrete tank and floor construction in the steel, chemical, food & beverage, refining, and pulp & paper industries.

For those applications where strong oxidizing acids are present, Sauereisen Sheet Membrane System 90/91 is preferred.

All Sauereisen membranes are designed to be used in a corrosion resistant system incorporating expansion joints and either monolithic or brick and mortar linings.

CHARACTERISTICS

• A dependable and economical hot-applied protective membrane system.
• Excellent acid and alkali (pH 0-12) as well as water resistance.
• Proven long life under acid-brick and monolithics in concrete tank and floor applications.
• Quickly and easily applied.

ELASTOMERIC JOINT COMPOUND 69

Physical properties were determined on specimens prepared under laboratory conditions using applicable ASTM procedures. Actual field conditions may vary and yield different results; therefore, data are subject to reasonable deviation. Data should not be used for specification purposes.

Sauereisen Elastomeric Joint Compound 69 is used as a flexible expansion joint in acid pickling tanks; in concrete, brick and tile floors; for sealing joints of ducts and conduits; and for general caulking and sealing where permanent flexibility and adhesion are required, along with resistance to mineral acids and alkalies. 69 is not resistant to oils, kerosene or petroleum solvents.

 CHARACTERISTICS

• Forms an impervious, flexible solid.
• Nonshrinking.
• Resists water, moisture, alkalies and most corrosive acids.
• For use within temperature range of -40° to 250°F.
• Excellent adhesion to concrete, brick, granite, glass, styrene copolymers and metals.

MANHOLE CHIMNEYSEAL F-88

Physical properties were determined on specimens prepared under laboratory conditions using applicable ASTM procedures. Actual field conditions may vary and yield different results; therefore, data is subject to reasonable deviation.

Sauereisen Manhole ChimneySeal F-88 is an elastomeric lining composed of fiber-reinforced, asphalt-modified urethane. ChimneySeal is used as a chemical-resistant membrane or gasket seal for the prevention of water infiltration.

Manhole ChimneySeal has excellent adhesion to most substrates. As a high solids elastomer, it is recommended when movement from temperature change or other causes will be encountered.

Manhole ChimneySeal maintains excellent elasticity and adhesion over a temperature range of -30°F to 250°F. The flexible barrier resists freeze/thaw stresses and movement. When subjected to mechanical stress, the lining has nearly 100% recovery. Manhole ChimneySeal also resists alkalies, salts and acid.

CHARACTERISTICS

• Outstanding chemical resistance to acids and alkalies.
• Remains flexible from -30°F to 250°F.
• Easy to apply by hand.
• Urethane-based elastomer.
• Suitable for application on steel, brick or concrete substrates.
• Excellent elasticity.

FIB-R-THANE 88T & 88S

Physical properties were determined on specimens prepared under laboratory conditions using applicable ASTM procedures. Actual field conditions may vary and yield different results; therefore, data are subject to reasonable deviation.

Sauereisen Fib-R-Thane is an elastomeric lining composed of fiber-reinforced, asphalt-modified urethane. Fib- R-Thane is used as a chemical-resistant membrane or gasket seal for the protection of concrete, block and steel. Available in two formulations, Fib-RThane 88T is applied by trowel, while 88S is the sprayable grade.

Fib-R-Thane has excellent adhesion to most substrates. As a high solids elastomer, it is recommended when movement from temperature change or other causes will be encountered. 88T & 88S resist acids, alkalies, and salts associated with flue gas immersion environments. The urethane content of Fib- R-Thane allows it to exhibit an improved resistance to oil, grease and solvents in comparison to standard asphalt.

Fib-R-Thane maintains excellent elasticity and adhesion over a temperature range of -30°F to 250°F. When subjected to mechanical stress, the lining has nearly 100% recovery.

CHARACTERISTICS

• Outstanding chemical resistance to acids and alkalies.
• Permanently flexible from -30°F to 250°F.
• Easy to apply by trowel or spray.
• Interlocking fiber matrix.
• Urethane-based elastomer.
• Suitable for application on steel, block or concrete substrates.
• Excellent elasticity.

HIGH TEMPERATURE MEMBRANE 89

Physical properties were determined on specimens prepared under laboratory conditions using applicable ASTM procedures. Actual field conditions may vary and yield different results; therefore, data are subject to reasonable deviation.

Sauereisen High Temperature Membrane 89 is a single-component, asphaltic mastic recommended as an impervious membrane under corrosion-resistant monolithic linings or acid-resistant brick masonry for the protection of metal or concrete substrates. Spray application with airless equipment results in a flexible coating resistant to acids, alkalies and salts associated with flue gas environments and substrate movement from temperature changes or other causes. The product is not recommended for use in oil, grease and solvent environments. 89 is not generally recommended for continuous liquid immersion. 89 maintains excellent elasticity and adhesion to concrete or steel substrates over a temperature range of -60°F to 300°F.

CHARACTERISTICS

• Outstanding chemical resistance to acids and alkalies.
• Recommended for use from -60°F to 300°F.
• Easy to apply. Can be topcoated within 24 hours.
• Suitable for application as a membrane on steel or concrete substrates.
• Excellent elasticity.
• Very low permeability

SHEET MEMBRANE/MEMBRANE TAPE 90/92

Physical properties were determined on specimens prepared under laboratory conditions using applicable ASTM procedures. Actual field conditions may vary and yield different results; therefore, data are subject to reasonable deviation.

Sauereisen Sheet Membrane 90 is an impervious synthetic elastomer of uniform quality and thickness for use in corrosion- resistant construction. It is a fiber-reinforced poly-tetra-fluoro-ethylene (PTFE) lining system. 90 replaces rubber, plastic and asphalt membranes commonly used on floors, tanks and process vessels, between substrate and acid/alkali-resistant brick.

The elastomeric sheet membrane remains flexible over a temperature range of -20° to +200°F. Thus, when the substrate moves, the membrane serves as a sheer pad between it and the brick lining. 90 is an easy-to-install, single-layer system which resists water, oil, most alkalies and acids. It will protect the substrate from corrosive chemical attack.

CHARACTERISTICS

• Long-term flexibility, even at temperatures as low as -20°F.
• Resistant to tearing, puncturing and aggressive chemicals.
• Simple installation. No melting. Just unroll, cut, & place.
• Time saving – work can proceed immediately after installation.
• Easy to repair – adhere patches as needed.

VITON CAULK 950-C

Sauereisen Viton Caulk 950-C is a flexible, one-component joint caulk for severe chemical environments. It also withstands service temperatures up to 400ºF.

Sauereisen 950-C offers excellent resistance to most acids, alkalies, and solvents common to industrial facilities.

CHARACTERISTICS

• Forms an impervious, flexible solid.
• Unaffected by temperatures from -40ºF to +400ºF.
• Excellent adhesion to concrete, brick, steel, and refractories.

VITON CAULK 950-G

Sauereisen Viton Caulk 950-G is a flexible, two-component joint caulk for severe chemical environments. It also withstands service temperatures up to 400°F.

Sauereisen 950-G offers excellent resistance to most acids, alkalies, and solvents common to industrial facilities. The product consists of a Base Material and Accelerator that are mixed prior to use.

CHARACTERISTICS

• Forms an impervious, flexible solid.
• Unaffected by temperatures from -40°F to +400°F.
• Excellent adhesion to concrete, brick, steel, and refractories.